RatingPlate Find your state
Browse the site

Type guides, state costs, model specs, and brand pages.

50-State Ranking
ABCDF
Sizing guideCapacity, first-hour rating, and temperature-rise fit.Accessories hubInstall extras, code-adjacent parts, and paid-link accessory picks.Rating plate guideFind and decode the label on your water heater.Tax credits & rebatesFederal 25C expired. State HEAR status and active rebate programs.Heat pump vs electric tankAnnual cost comparison using verified model specs.Heat pump vs gas tanklessOperating cost, install complexity, and 10-year ownership compared.Replacement cost guideEquipment, labor, and hidden costs by type. 2026 data.Gas to heat pumpReplacing a gas water heater in 2026: costs and rebates.Heat pump vs gas tankOperating cost in all 50 states and DC.Garage and basement installsENERGY STAR certified models compared.Quietest models (dBA)ENERGY STAR certified models compared.DOE 2029 standardsWhat changes in 2029 and which product classes move first.
Model specs

RE2H50S

Bradford White / 45-Gallon Heat Pump Water Heater
Lower running cost than standard electric, but height, 240V, and condensate still decide fit.
UEF3.44Certified efficiency
First hour65 galHot water delivery
Footprint59.1875" × 21.75"Height × depth
Running cost~$170/yrU.S. average electricity
Estimated annual savings: $466 compared to a standard electric tank. Based on U.S. average energy prices. See all heat pump models

RE2H50S operating cost

This unit saves roughly $466 every year compared to the standard electric tank it replaces
RE2H50S
$170/yr
Std tank (0.92 UEF)
$637/yr
~2.6year payback
At $466/yr in savings, the upfront premium pays for itself in about 2.6 years. Over 10 years: roughly $3,460 in net savings.
Your state changes the math. Annual cost ranges from ~$117/yr (ND) to ~$418/yr (HI).
U.S. avg electricity: 18.0¢/kWh (EIA, 12-month avg. through Aug 2026). The federal tax credit of up to $2,000 under IRA Section 25C expired December 31, 2025. State and utility rebates may still apply.
Your state changes the cost. Ranges from $117/yr to $418/yr depending on your state's electricity rate.

RE2H50S cost by state

Ranges from $117/yr to $418/yr depending on your state's electricity rate. U.S. average: $170/yr.

Based on 944 kWh/yr (ENERGY STAR rated) at each state's residential electricity rate (EIA, 12-month avg. through Aug 2026). Click a state for rebates, code requirements, and model rankings.

RE2H50S in the 50-gallon heat pump class: #12 of 15 on efficiency.

Should this be on your shortlist?

Best for

shortest in class, 10-year tank warranty (class-leading)

Not ideal for

lower efficiency than most class peers

  • Why it makes shortlists: fits where taller units cannot
Within Bradford White's 50-gallon heat pump lineup, this page fills a specific role.

Where it sits in the Bradford White lineup

  • On efficiency, Bradford White RE2HP50-1NCTT sits higher in Bradford White's 50-gallon heat pump lineup at 3.89 UEF versus 3.44 here.
  • Hot-water delivery is at the top of this brand bucket at 65 first-hour gallons.
  • Fit is strongest where height is tight: this is the shortest published option in Bradford White's 50-gallon heat pump lineup at 59.2 inches.
Closest same-brand alternatives:
Bradford White RE2HP50-1NCTT
The bill may work. Now check what actually changes on install day before you let the shortlist settle.

Switching to the RE2H50S

From a standard electric tank

✓
Same voltage (240V). Verify breaker size matches unit requirements (30A typical).
▲
Taller unit (59.1875"). Measure overhead clearance.
▲
Condensate drain needed. Floor drain or condensate pump.
▲
Air space needed around the unit for heat exchange.
Fewest install changes of any upgrade path. Scope depends on existing wiring, clearances, and condensate routing.

From a gas tank

▲
New 240V/30A circuit required. Hire an electrician.
✓
Gas line capped. No more gas bill for hot water.
✓
Existing flue/vent can be removed.
▲
Condensate drain needed.
Two trades needed (plumber + electrician).

From an older heat pump

✓
Same electrical. Same condensate drain.
▲
Check height. This unit is 59.1875" tall.
✓
Standard water connections.
Similar installation profile. Verify dimensions, clearances, and condensate routing match your existing setup.
Height, electrical service, condensate, and noise. These are the four things that determine whether a heat pump fits your space and your quote.

RE2H50S installation specifications

Dimensions

Height59.1875 in
Width21.75 in
Depth21.75 in
Connections3/4 inch NPT

Electrical

Voltage240V
Amperage19A
Breaker30A dedicated

Heat Pump

Min ambient temp35°F
RefrigerantR-134a
Noise51 dBA

Safety and installation warnings

These warnings apply to this water heater type. Always follow the manufacturer's installation instructions and local building codes. Hire a licensed professional for installation.

T&P relief valve. Every tank-type water heater has a temperature and pressure relief (T&P) valve. This is a critical safety device that prevents tank rupture by releasing water if temperature exceeds 210°F or pressure exceeds 150 PSI. The discharge pipe must run to within 6 inches of the floor or to an exterior drain. Never cap or plug the T&P valve. Test it annually.
Scald prevention. The recommended maximum water temperature is 120°F to prevent scalding. Higher temperatures (130-140°F) reduce Legionella bacteria risk but require a thermostatic mixing valve at the outlet to deliver safe temperatures at fixtures. Some jurisdictions require mixing valves when the tank is set above 120°F.
Cold-climate performance. Below 35°F ambient air temperature, the heat pump compressor shuts off and the unit falls back to electric resistance heating at much lower efficiency. The rated UEF assumes DOE test conditions (67°F ambient, 58°F inlet water). In cold climates or unconditioned spaces (garages, unfinished basements), actual annual efficiency will be lower than the rated UEF, and energy costs will be higher than the estimates shown above.
Cold exhaust air. Heat pump water heaters extract heat from surrounding air and exhaust cold, dehumidified air. Do not install in a space that is already difficult to heat. The unit will lower the room temperature by several degrees, which may increase HVAC costs or reduce heat pump efficiency in winter.

Common install considerations for heat pump units

What is required depends on your existing installation, local code, and installer preference.

Thermal Expansion Tank Often required by code Check on Amazon (paid link)
Water Heater Drain Pan Often required by code Check on Amazon (paid link)
Earthquake Straps (Seismic Restraints) Often required by code Check on Amazon (paid link)
Full accessories list

Warranty

Coverage

Tank10 yr
Class rankings: 50-gallon heat pump water heaters

Rankings

Efficiency (UEF) higher is better
#12of 15Efficiency
1
GE Profile PH50S10BP...
4.3
2
LG APHWC501M
3.93
3
Bradford White RE2HP...
3.89
4
Rheem PROPH50 T2 RH4...
3.88
5
Navien NWP500S050AUMB
3.85
6
A. O. Smith HPTS-50-2
3.8
7
Midea MAHW-50VN3A
3.75
8
Rinnai REHP50BM
3.75
9
A. O. Smith HPTA-50-2
3.68
10
American HPA10250H04...
3.68
11
Noritz NHP50
3.46
12
Bradford White RE2H50S
3.44
13
GE Profile PF50S10FP...
3.2
14
Rheem PROPH50 T0 RH120
3
15
Rheem XE50T10HM00U0
3
Height shortest to tallest
#1Class LeaderCompactness · 15 models tested
1
Bradford White RE2H50S
59.1875"
2
Rheem PROPH50 T2 RH4...
61.75"
3
Rheem XE50T10HM00U0
61.75"
4
A. O. Smith HPTA-50-2
63"
5
A. O. Smith HPTS-50-2
63"
6
American HPA10250H04...
63"
7
Navien NWP500S050AUMB
63"
8
LG APHWC501M
63.97"
9
Bradford White RE2HP...
64.125"
10
Rheem PROPH50 T0 RH120
65"
11
Rinnai REHP50BM
66.4"
12
Midea MAHW-50VN3A
66.75"
13
Noritz NHP50
67"
14
GE Profile PF50S10FP...
68.25"
15
GE Profile PH50S10BP...
68.25"
First Hour Rating higher means more hot water
#6of 15Hot Water Delivery
1
GE Profile PH50S10BP...
77 gal
2
LG APHWC501M
76 gal
3
Rinnai REHP50BM
73 gal
4
Midea MAHW-50VN3A
69 gal
5
Rheem PROPH50 T2 RH4...
67 gal
6
A. O. Smith HPTA-50-2
65 gal
7
A. O. Smith HPTS-50-2
65 gal
8
American HPA10250H04...
65 gal
9
Bradford White RE2H50S
65 gal
10
Bradford White RE2HP...
65 gal
11
Navien NWP500S050AUMB
65 gal
12
GE Profile PF50S10FP...
59 gal
13
Noritz NHP50
58 gal
14
Rheem XE50T10HM00U0
55 gal
15
Rheem PROPH50 T0 RH120
51 gal
⚡
Starting May 2029, new federal standards require heat pump technology for electric water heaters over 35 gallons. Electric tanks 35 gal and under can still use resistance elements. Every heat pump on this list already exceeds the future standard. Read the full DOE 2029 analysis

Common questions about the Bradford White RE2H50S

From manufacturer specs, EIA energy data, and DOE regulations.

How much does the RE2H50S cost to run per year?
~$170/yr at the U.S. average electricity rate. That is roughly $466/yr less than a standard electric tank.
How much hot water does the RE2H50S deliver?
65 gallons in the first hour from a 45-gallon tank. Suitable for a household of 1 to 3 people at medium draw.
Will the RE2H50S fit in my space?
59.1875" tall, 21.75" wide, 21.75" deep. Measure your space including clearances before ordering.
What electrical circuit does the RE2H50S need?
240V, 30A dedicated circuit. Check your electrical panel before installation.
Does the RE2H50S work in cold climates?
The heat pump operates down to 35°F ambient temperature. Below that, it switches to standard electric resistance mode, losing the efficiency advantage. In cold climates, install inside the heated building envelope, not in an unheated garage.
What warranty does the RE2H50S come with?
10-year tank warranty. Register with Bradford White after installation to activate full coverage.
Is the RE2H50S eligible for rebates?
ENERGY STAR certified heat pump water heater. The federal tax credit (IRA Section 25C, up to $2,000) expired December 31, 2025. State and utility rebates may still apply depending on your location.
Is this unit future-proof under the 2029 DOE standards?
Yes. Starting May 2029, electric water heaters over 35 gallons must use heat pump technology. This unit already exceeds that standard.
Full specifications
Performance
UEF3.44
First Hour Rating65 gal
kW Input4.5 kW
Draw PatternMedium
Est. Annual Energy944 kWh/yr
Capacity
Storage Volume45 gal
Physical
Height59.1875 in
Width21.75 in
Depth21.75 in
Connections3/4 inch NPT
Electrical
Voltage240 V
Amperage19 A
Breaker30A dedicated
Heat Pump
Type240 Volt Integrated HPWH
Min Ambient35 °F
RefrigerantR-134a
Sound Level51 dBA
Warranty
Tank10 yr
Certifications
ENERGY STARCertified
MarketsUnited States, Canada
Keep the route moving

Other Bradford White models and the full heat pump guide, if this one isn't the right fit.

Sources. Bradford White, ENERGY STAR, Retailer listing. Specs last verified 2026-03-17.Methodology
As an Amazon Associate we earn from qualifying purchases. RatingPlate may earn a commission when you use qualifying Amazon links. Links to Amazon are marked "(paid link)". We never display prices because Amazon prohibits showing prices outside their platform.