RatingPlate Find your state
Browse the site

Type guides, state costs, model specs, and brand pages.

50-State Ranking
ABCDF
Sizing guideCapacity, first-hour rating, and temperature-rise fit.Accessories hubInstall extras, code-adjacent parts, and paid-link accessory picks.Rating plate guideFind and decode the label on your water heater.Tax credits & rebatesFederal 25C expired. State HEAR status and active rebate programs.Heat pump vs electric tankAnnual cost comparison using verified model specs.Heat pump vs gas tanklessOperating cost, install complexity, and 10-year ownership compared.Replacement cost guideEquipment, labor, and hidden costs by type. 2026 data.DOE 2029 standardsWhat changes in 2029 and which product classes move first.
Model specs

REHP65BM

Rinnai / 60-Gallon Heat Pump Water Heater
Lower running cost than standard electric, but height, 240V, and condensate still decide fit.
UEF3.9Certified efficiency
First hour80 galHot water delivery
Footprint65.5" × 25.69"Height × depth
Running cost~$216/yrU.S. average electricity
Estimated annual savings: $701 compared to a standard standard electric tank. Based on U.S. average energy prices. See all heat pump models

REHP65BM operating cost

This unit saves roughly $701 every year compared to the standard electric tank it replaces
REHP65BM
$216/yr
Std tank (0.92 UEF)
$917/yr
~1.7year payback
At $701/yr in savings, the upfront premium pays for itself in about 1.7 years. Over 10 years: roughly $5,810 in net savings.
Your state changes the math. Annual cost ranges from ~$135/yr (ND) to ~$493/yr (HI).
U.S. avg electricity: 17.4¢/kWh (EIA, Jan 2026). The federal tax credit of up to $2,000 under IRA Section 25C expired December 31, 2025. State and utility rebates may still apply.
Your state changes the cost. Ranges from $135/yr to $493/yr depending on your state's electricity rate.

REHP65BM cost by state

Ranges from $135/yr to $493/yr depending on your state's electricity rate. U.S. average: $216/yr.

Based on 1240 kWh/yr (ENERGY STAR rated) at each state's residential electricity rate (EIA, Jan 2026). Click a state for rebates, code requirements, and model rankings.

REHP65BM in the 65-gallon heat pump class: #4 of 8 on efficiency.

Should this be on your shortlist?

Best for

10-year tank warranty (class-leading)

Not ideal for

tallest in class

  • Why it makes shortlists: top-half efficiency in a 8-model class
Within Rinnai's 65-gallon heat pump lineup, this page fills a specific role.

Where it sits in the Rinnai lineup

  • On efficiency, Rinnai REHP80BM sits higher in Rinnai's 65-gallon heat pump lineup at 4.00 UEF versus 3.90 here.
  • For heavier simultaneous demand, Rinnai REHP80BM is higher at 91 first-hour gallons versus 80 here.
  • Fit is strongest where height is tight: this is the shortest published option in Rinnai's 65-gallon heat pump lineup at 65.5 inches.
Closest same-brand alternatives:
Rinnai REHP50BMRinnai REHP80BM
Check price and availability: Rinnai REHP65BM on Amazon
The bill may work. Now check what actually changes on install day before you let the shortlist settle.

Switching to the REHP65BM

From a standard electric tank

Same voltage (240V). Verify breaker size matches unit requirements (30A typical).
Taller unit (65.5"). Measure overhead clearance.
Condensate drain needed. Floor drain or condensate pump.
Air space needed around the unit for heat exchange.
Fewest install changes of any upgrade path. Scope depends on existing wiring, clearances, and condensate routing.

From a gas tank

New 240V/30A circuit required. Hire an electrician.
Gas line capped. No more gas bill for hot water.
Existing flue/vent can be removed.
Condensate drain needed.
Two trades needed (plumber + electrician).

From an older heat pump

Same electrical. Same condensate drain.
Check height. This unit is 65.5" tall.
Standard water connections.
Similar installation profile. Verify dimensions, clearances, and condensate routing match your existing setup.
Height, electrical service, condensate, and noise. These are the four things that determine whether a heat pump fits your space and your quote.

REHP65BM installation specifications

Dimensions

Height65.5 in
Width25.6 in
Depth25.69 in
Weight250 lbs

Electrical

Voltage240V
Amperage24A
Breaker30A dedicated

Heat Pump

Min ambient temp37.4°F
Max ambient temp107.6°F
RefrigerantR-134a
Noise49 dBA

Safety and installation warnings

These warnings apply to this water heater type. Always follow the manufacturer's installation instructions and local building codes. Hire a licensed professional for installation.

T&P relief valve. Every tank-type water heater has a temperature and pressure relief (T&P) valve. This is a critical safety device that prevents tank rupture by releasing water if temperature exceeds 210°F or pressure exceeds 150 PSI. The discharge pipe must run to within 6 inches of the floor or to an exterior drain. Never cap or plug the T&P valve. Test it annually.
Scald prevention. The recommended maximum water temperature is 120°F to prevent scalding. Higher temperatures (130-140°F) reduce Legionella bacteria risk but require a thermostatic mixing valve at the outlet to deliver safe temperatures at fixtures. Some jurisdictions require mixing valves when the tank is set above 120°F.
Cold-climate performance. Below 37.4°F ambient air temperature, the heat pump compressor shuts off and the unit falls back to electric resistance heating at much lower efficiency. The rated UEF assumes DOE test conditions (67°F ambient, 58°F inlet water). In cold climates or unconditioned spaces (garages, unfinished basements), actual annual efficiency will be lower than the rated UEF, and energy costs will be higher than the estimates shown above.
Cold exhaust air. Heat pump water heaters extract heat from surrounding air and exhaust cold, dehumidified air. Do not install in a space that is already difficult to heat. The unit will lower the room temperature by several degrees, which may increase HVAC costs or reduce heat pump efficiency in winter.

Common install considerations for heat pump units

What is required depends on your existing installation, local code, and installer preference.

Thermal Expansion Tank Often required by code Check on Amazon (paid link)
Water Heater Drain Pan Often required by code Check on Amazon (paid link)
Earthquake Straps (Seismic Restraints) Often required by code Check on Amazon (paid link)
Full accessories list

Warranty

Coverage

Tank10 yr
Parts10 yr
Labor1 yr
Class rankings: 65-gallon heat pump water heaters

Rankings

Efficiency (UEF) higher is better
#4of 8Efficiency
1
Bradford White RE2HP...
4.2
2
Rheem PROPH65 T2 RH4...
4.05
3
Navien NWP500S065AUMB
4.03
4
Rinnai REHP65BM
3.9
5
A. O. Smith HPTA-66-2
3.84
6
A. O. Smith HPTS-66-2
3.7
7
Bradford White RE2H65T
3.64
8
Noritz NHP65
3.34
Height shortest to tallest
#8Last in ClassCompactness · 8 models tested
1
Bradford White RE2HP...
44.6"
2
A. O. Smith HPTA-66-2
61"
3
A. O. Smith HPTS-66-2
61.5"
4
Navien NWP500S065AUMB
63"
5
Bradford White RE2H65T
63.75"
6
Noritz NHP65
63.8"
7
Rheem PROPH65 T2 RH4...
64.19"
8
Rinnai REHP65BM
65.5"
First Hour Rating higher means more hot water
#4of 8Hot Water Delivery
1
A. O. Smith HPTA-66-2
83 gal
2
A. O. Smith HPTS-66-2
82 gal
3
Bradford White RE2HP...
82 gal
4
Navien NWP500S065AUMB
80 gal
5
Rinnai REHP65BM
80 gal
6
Bradford White RE2H65T
79 gal
7
Rheem PROPH65 T2 RH4...
75 gal
8
Noritz NHP65
70 gal
Starting May 2029, new federal standards require heat pump technology for electric water heaters over 35 gallons. Electric tanks 35 gal and under can still use resistance elements. Every heat pump on this list already exceeds the future standard. Read the full DOE 2029 analysis

Common questions about the Rinnai REHP65BM

From manufacturer specs, EIA energy data, and DOE regulations.

How much does the REHP65BM cost to run per year?
~$216/yr at the U.S. average electricity rate. That is roughly $701/yr less than a standard electric tank.
How much hot water does the REHP65BM deliver?
80 gallons in the first hour from a 60-gallon tank. Suitable for a household of 1 to 3 people at medium draw.
Will the REHP65BM fit in my space?
65.5" tall, 25.6" wide, 25.69" deep. Measure your space including clearances before ordering.
What electrical circuit does the REHP65BM need?
240V, 30A dedicated circuit. Check your electrical panel before installation.
Does the REHP65BM work in cold climates?
The heat pump operates down to 37.4°F ambient temperature. Below that, it switches to standard electric resistance mode, losing the efficiency advantage. In cold climates, install inside the heated building envelope, not in an unheated garage.
What warranty does the REHP65BM come with?
10-year tank warranty, 10-year parts. Register with Rinnai after installation to activate full coverage.
Is the REHP65BM eligible for rebates?
ENERGY STAR certified heat pump water heater. The federal tax credit (IRA Section 25C, up to $2,000) expired December 31, 2025. State and utility rebates may still apply depending on your location.
Is this unit future-proof under the 2029 DOE standards?
Yes. Starting May 2029, electric water heaters over 35 gallons must use heat pump technology. This unit already exceeds that standard.
Full specifications
Performance
UEF3.9
First Hour Rating80 gal
kW Input5.5 kW
Draw PatternHigh
Est. Annual Energy1240 kWh/yr
Capacity
Storage Volume60 gal
Physical
Height65.5 in
Width25.6 in
Depth25.69 in
Weight250 lbs
Electrical
Voltage240 V
Amperage24 A
Breaker30A dedicated
Heat Pump
Type240 Volt Integrated HPWH
Min Ambient37.4 °F
Max Ambient107.6 °F
RefrigerantR-134a
Sound Level49 dBA
Warranty
Tank10 yr
Parts10 yr
Labor1 yr
Certifications
ENERGY STARCertified
MarketsUnited States, Canada
Keep the route moving

Other Rinnai models and the full heat pump guide, if this one isn't the right fit.

Sources. ENERGY STAR, Lowe's, Retailer listing, Rinnai. Specs last verified 2026-03-17.Methodology
As an Amazon Associate we earn from qualifying purchases. RatingPlate may earn a commission when you use qualifying Amazon links. Links to Amazon are marked "(paid link)". We never display prices because Amazon prohibits showing prices outside their platform.